-
Simple procedure: Ensure the tile surface is free of water before Brush anti-slip gel. Once application provides slip resistance for several years (more than 1 year).
Important notice: Ensure uniformly application of the gel to avoid thick accumulation in certain areas. More gel doesn't necessarily enhance slip resistance; uniform coverage on the tile surface provides the same result regardless of thickness.
-
Brush gel and wait for 5 minutes, flush gel timely.
Do not wait for too long!
It's not that the longer the gel coverage time, the better the effect 5 minutes is enough for the anti slip effect.
-
A bottle of anti-slip gel 300g, can cover about 3m square.
-
The product has no irritating odor, after brushing for 5 miutes, there is no odor and no residue after flush with water.
Could be used with confidence.
-
After using the anti-slip gel, the ground is cleaned normally without affecting the anti-slip effect. The cleaner the ground is, the more obvious the anti-slip effect is. The anti-slip principle of the anti-slip gel is that the polymer nanomaterials penetrate into the micro-pores of the tile enamel to form micro-suction cups, so as to achieve a long-lasting anti-slip effect. It should be noted that because the shower gel or sweat dirt is not cleaned for a long time, the ground will form a layer of oil film, which affects the anti-slip effect, so often keep the ground clean and anti-slip effect will be more significant.
-
Not suitable for sealed surfaces such as wooden flooring and floor coatings. It may cause a slight matte effect on highly glossy ceramic tile surfaces. It may also cause varying degrees of lightening or fading on dark-colored marble. If concerned about the matte effect or fading, a small test patch can be applied in an inconspicuous area before applying it to the entire surface, ensuring satisfaction.
-
Yes, it can be used, such as in kitchens, balconies, rural living rooms, or other areas without drainage where it's inconvenient to flush water. After applying the gel uniformly and waiting for 5 minutes, use a dry mop or cloth to remove the gel cleanly. Then, use a clean damp mop to wipe the surface several times until there is no more anti-slip gel residue.
-
Yes, the anti-slip gel is valid for 2 years. After applying the non-slip gel, clean the roller brush and seal the gel bottle with the bottle sealing cap. It can be reused many times the next time you need it.
-
No, our polymer nano non-slip materials only penetrate the ceramic tile nano surface has no effect on the strength and life of the ceramic tile. Coated with anti-slip gel tile floor tiles will have a very weak visual effect, almost indistinguishable by the naked eye.
